Dlubal RX-TIMBER 2.29.01

Free Download Dlubal RX-TIMBER Roof 2 for Windows is a stand‑alone program that performs the ultimate and serviceability limit state design and fire resistance design of mono-pitch and duo pitch roofs according to EN 1995‑1‑1.

You can also FREE download COMSOL Multiphysics

Overview of Dlubal RX-TIMBER Roof 2 Benefits

There are various options available for modeling a roof in Dlubal RX-TIMBER Roof. Graphical representations facilitate the geometry input. Modifications are updated automatically.

In addition, it is possible to consider cross‑section weakening on supports. Optionally, you can define if the design of support pressure on the rafter side should be performed.

In RX-TIMBER Roof, the following calculation settings are possible:

• Selection of the designs to be performed (ULS, SLS, fire resistance)
• Determination of displaying support forces and deformations
• Adjusting the recommended limit values for the serviceability limit state
• Specification of parameters for the fire resistance design to be performed in compliance with the simplified method
• Increasing strengths according to EN 1995‑1‑1, Clause 3.2

Overview of Dlubal RX-TIMBER Roof 2 Features

• Design of the following roof types: Flat roof, monopitch roof, Duopitch roof (symmetrical/asymmetrical)
• Definition of any additional support and free selection of degrees of freedom (additional free definition of translational and rotational spring stiffness of supports and releases)
• Arrangement of up to five collar/tie beams, including intermediate support for duo pitch roof
• Automatic generation of wind and snow loads
• Automatic generation of required combinations for the ultimate and serviceability limit state as well as fire resistance design (additional definition of several member and nodal loads)
• Simple geometry input with illustrative graphics
• The input of tapered cantilevers with cut-to-grain on the bottom side of rafters
• An extensive material library that user-defined materials can extend
• Determination of design ratios, support forces, and deformations
• Color reference scales in results tables
• Direct data export to MS Excel
• DXF interface for preparation of production documents in CAD
• Program languages: English, German, Czech, Italian, Spanish, French, Portuguese, Polish, and Russian
• Verifiable printout report with all required designs available in many languages, for example, English, German, French, Italian, Spanish, Russian, Czech, Polish, Portuguese, Dutch

Technical Details and System Requirements

• Supported OS: Windows 11 / Windows 10 / Windows 8.1 / Windows 7
• Processor: Multicore Intel Series or above, Xeon or AMD equivalent
• RAM: 4GB (8GB or more recommended)
• Free Hard Disk Space: 4GB or more recommended