AlyJamesLab OB-XTRM v2.0.1

Free Download AlyJamesLab OB-XTRM full version standalone offline installer for Windows. VST AU 8 Voices and OB-Line based Extended Synth.

Overview of AlyJamesLab OB-XTRM

What happens when you take eight mono synths and use them together? Huge analog sound! This sound is the result of slight imperfections between each voice card and, because of some electronic components (mis)behavior, parts from the original circuit (notably the OB-X) caused all sorts of distortion happening at different stages from filter to VCA and also at the output stage, OB-Xtreme place special attention to the later with an emphasis on "the Growl."

There is a lot to say about what V2 is, and I can already say what it is not: a simple V1 cross-platform update. V2 is a complete remake. While V1 was a more straightforward take on an OB voice card architecture, V2 is more closely related to original OB designs and specs (including features from OB-X, OB-Xa, etc.). It is not a direct V1 replacement. Nevertheless, it got a Legacy mode for Envelope Generators and Filter control so that V1 sounds can be reproduced or made (more on that later).

V2 has higher specs in every part of the circuit, and it comes as an upgraded gift to all V1 owners. V1 owners will get it free or use a "give what you want" option.

Features of AlyJamesLab OB-XTRM

• Cross Platform 64bit capability (Windows VST3 and Mac AU(Audiounit)
• 64bit build using the latest OS and IDE(PC VisualStudio and Mac Xcode)
• Updated GUI(graphic Interface) also now using high-res graphics and DPI awareness
• Rewritten and Refined sound engine
• 8 voices poly or mono unison with per voice PAN control and global stereo widening control can also turn into authentic (one voice) mono or act as polyphonic unison (8x8)
• Most of the OB-X/OB-Xa functions were added (OSC shapes, X-MOD, F-ENV, SYNC, etc.) to the new modulation routing.
• Enhanced oscillators spectrum and filter modes (2Pole/4Pole LowPass and 2Pole BandPass) based on OB 2pole SVF and CEM 3320 24Db, 4Pole can have an optional volume compensation
• Accurate SAW + PULSE OSC mixing (can produce +1 octave harmonic depending on the pulse width).
• Up to x32 oversampling
• POST and PRE OTA (CA3080 chip used for VCA, Filter, and Output Stage) variable distortion (Xtreme factor) with bypass
• x8 Voice cards voltage offsets and deviation can now be controlled easily by five macro controls
• Legacy modes for Filter modulation and EG/VCA shapes to match V1 sounds and behavior
• Vibrato LFO, original LFO + additional LFO 2, Phase reverse option mode for LFO (card 1,3,5,7) got phase reversed modulations, can also invert Keytracking
• LFOs have gate re-triggering option, SINE, RAMP, PULSE, SAW, TRI, S&H, and Noise shapes
• LFO can be set to single: one LFO on the main board for all voice cards or to multi: one LFO per card
• Optional OB-X 6bit resolution on the Filter Cutoff knob scanning
• Sustain pedal can act normally or use the OB Mode (sustain like a piano) controllable Envelope Release offset
• Basic internal preset browser with main categories
• OB-X (light mode) or OB-Xa (dark mode) changeable skins

Technical Details and System Requirements

• Supported OS: Windows 11, Windows 10, Windows 8.1, Windows 7
• RAM (Memory): 2 GB RAM (4 GB recommended)
• Free Hard Disk Space: 200 MB or more